Install your fire hydrant system at low cost with Fire Hydrant Dealers in Gurgaon

What is Fire Hydrant Systems?

A fire hydrant system is a part of the Fire protection system. It will be an apparent system. Fire Hydrant System installation is relatively easy but sometimes we required the help of professionals when we faced obstacles while installing a hydrant system. If you are stuck in any kind of problem-related to fire hydrant or fire protection systems, contact best fire hydrant system dealers in Gurgaon NCR.

Functioning OF Fire hydrant system

A special well is dug, called “Fire Well”, where water is stored throughout the year for 365days. This water well is connected to the pump room. From the pump room, there are two to three main pipes. These pipes form a network of pipe that covers the factory compound and the factory. The pump has the work, to nonstop filling all the pipes connected with water under pressure. The pressure is nearly 7bar to 10bar.
When a fire is seen by a person, he activates the hydrant system and points it in the direction of the fire. A very strong flow of water now, attacks the fire and the fire is eventually extinguished. The pump continuously pumps the water to maintain system pressure.

Why use a fire hydrant System?

Every home, office, school, petrol pump should have a fire safety system. Fire Hydrant Systems are very strong and can be used for medium to large-sized fires. Fire Hydrant Systems have a long-range. Since the Fire Hydrant System is spread out, the fire hydrant can attack the fire from different angles. This entire system requires low maintenance and virtually, does not leak water. Besides this, Fire Hydrant Systems have a long life.

How to install fire hydrant Systems and why it should be done by professionals?

Fire hydrant installation consists of a system of pipework connected directly to the water supply main to provide water to every hydrant outlet and is intended to provide water for the firemen to fight a fire. The water is discharged into the fire engine form which is then pumped and sprayed over the fire. Where the water supply is not reliable or inadequate, hydrant pumps should be provided to pressurize the fire mains. It should be connected with a pipe with high water flow, at the right angle and at the place from where all the nearby areas can be easily covered.